| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 200.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 3.1 WATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| BODY SIZE | 15 |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 675.50 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 83.50 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 53.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 44.00 NOMINAL |
| TRANSFORMATION RATIO | 0.767 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.600 INPUT TO OUTPUT NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES NOMINAL |
| TORQUE GRADIENT PER ANGULAR DEG | 0.030 INCH-OUNCES NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 1.3114 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND |
| 0.8750 INCHES MAXIMUM |
| OVERALL LENGTH | 2.4890 INCHES MINIMUM AND |
| 2.5150 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND |
| 1.4400 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND |
| 0.0960 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 1.3090 INCHES MINIMUM AND |
| 1.3150 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND |
| 0.0430 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND |
| 0.1350 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7690 INCHES MINIMUM AND |
| 1.7750 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1030 INCHES NOMINAL |
| SECURING HOLE QUANTITY | 4 |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND |
| 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.6220 INCHES MINIMUM AND |
| 0.6420 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 99932 |
| DESIGN CONTROL REFERENCE | 147-006-0001 MOD BY SRS 27823 |