| SHOULDER LENGTH | 0.2520 NOMINAL CENTIMETERS |
| SPECIAL FEATURES | ROTOR VOLTAGE RATING 2.6 V MAX |
| ZRO RESISTANCE IN OHMS | 99.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 74.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 765.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 112.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 2.6 WATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 358.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TRANSFORMATION RATIO | 0.033 ROTOR TO STATOR NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0/+8.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 14.4 CENTIMETER-GRAMS MAXIMUM |
| AFT OF FIRST FLANGE DIAMETER | 1.9950 INCHES MAXIMUM |
| BODY DIAMETER | 1.9995 NOMINAL CENTIMETERS |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 23 |
| BODY STYLE | STANDARD ROUND D |
| FLANGE DIAMETER | 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 4.00 INPUT |
| III SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 Y-STATOR |
| PILOT DIAMETER | 0.6000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 15.000 OUTPUT TO INPUT NOMINAL |
| PILOT LENGTH | 0.0460 NOMINAL INCHES |
| PLUS J ZRO REACTANCE IN OHMS | 69.00 NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 5.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.6950 INCHES MAXIMUM |
| OVERALL LENGTH | 4.5490 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 45.00 NOMINAL |
| SECOND SHOULDER DIAMETER | 1.9995 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.1700 NOMINAL CENTIMETERS |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT END PLAY | 0.0050 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0003 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES MINIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9950 INCHES MAXIMUM |