5305-00-988-6604 SCREW,MACHINE Index 3120-00-988-6606 BEARING,PLAIN,SELF-ALIGNING

National Stock Number:
5990-00-988-6605

Federal Supply Class:
5990

National Item Identification Number:
009886605

Description:
SYNCHRO,CONTROL TRANSFORMER

Detail:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE ROTOR IS DEPENDENT UPON BOTH THE POSITION OF THE ROTOR AND THE ELECTRICAL INPUT TO THE STATOR FROM A TRANSMITTER SYNCHRO OR A DIFFERENTIAL SYNCHRO. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, OR VARIABLE TRANSFORMERS.


Manufacturer Information:
900141-7306481NORTHROP GRUMMAN SYSTEMS CORPORATION
900141-7399932MOOG INC.
BTC-8-E-6/A00299932MOOG INC.


Techincal Specification:
STATOR INPUT VOLTAGE RATING IN VOLTS11.8 NOMINAL
STATOR INPUT CURRENT RATING22.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING58.0 MILLIWATTS NOMINAL
TERMINAL TYPE AND QUANTITY5 SOLDER STUD
BODY STYLESTANDARD ROUND A
FREQUENCY IN HERTZ400.0 NOMINAL
BODY SIZE8
ZRO RESISTANCE IN OHMS800.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS2500.00 NOMINAL
ZSO RESISTANCE IN OHMS120.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS450.00 NOMINAL
ZRS RESISTANCE IN OHMS920.00 NOMINAL
PLUS J ZRS REACTANCE IN OHMS280.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS550.00 NOMINAL
STATOR DC RESISTANCE IN OHMS100.00 NOMINAL
TRANSFORMATION RATIO0.454 ROTOR TO STATOR NOMINAL
PHASE SHIFT ANGLE IN DEG9.200 INPUT TO OUTPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT0.02 OUTPUT
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT0.03
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-5.0 TO 5.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS9.00 CENTIMETER-GRAMS MAXIMUM
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS3.00 CENTIMETER-GRAMS MAXIMUM
PILOT DIAMETER0.4995 INCHES MINIMUM AND
0.5000 INCHES MAXIMUM
OVERALL LENGTH2.0240 INCHES NOMINAL
FLANGE DIAMETER0.7500 INCHES NOMINAL
FLANGE THICKNESS0.0620 INCHES NOMINAL
UNDERCUT DIAMETER0.6900 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL
PILOT LENGTH0.0430 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE1.3680 INCHES MAXIMUM
SHAFT TYPEROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER0.0895 INCHES MINIMUM AND
0.0900 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH0.4810 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH0.0250 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH0.0200 INCHES NOMINAL SINGLE SHAFT
TERMINAL LOCATIONREAR
BODY MATERIALSTEEL, STAINLESS
THE MANUFACTURERS DATA
MANUFACTURERS CODE06481
DESIGN CONTROL REFERENCE900141-73


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us