5990-01-028-9594 RESOLVER,ELECTRICAL Index 4730-01-028-9596 ADAPTER,STRAIGHT,TUBE TO HOSE

National Stock Number:
5990-01-028-9595

Federal Supply Class:
5990

National Item Identification Number:
010289595

Description:
RESOLVER,ELECTRICAL,LINEAR

Detail:
AN ITEM CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED WHICH PROVIDES ACCURATE LINEAR INDICATION OF SHAFT ROTATION ABOUT A REFERENCE POSITION IN THE FORM OF A POLARIZED VOLTAGE WHOSE MAGNITUDE IS PROPORTIONAL TO ANGULAR DISPLACEMENT AND PHASE RELATIONSHIP INDICATES DIRECTION OF SHAFT ROTATION. ITS WINDINGS AND SLOTS ARE NOT UNIFORMLY DISTRIBUTED, BUT INSTEAD ARE DELIBERATELY MODIFIED TO PRODUCE A LINEAR OUTPUT WHICH IS USUALLY LIMITED TO LESS THAN PLUS OR MINUS 90 DEGREES OF EFFECTIVE ELECTRICAL TRAVEL. NORMALLY IT HAS ONLY ONE ENERGIZATION WINDING AND ONE OUTPUT WINDING. SEE ALSO RESOLVER, ELECTRICAL.


Manufacturer Information:
CM4102800188818KEARFOTT CORPORATION


Techincal Specification:
BODY SIZE8
ROTOR INPUT VOLTAGE RATING IN VOLTS115.0 NOMINAL
ROTOR INPUT CURRENT RATING17.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING336.0 MILLIWATTS NOMINAL
FREQUENCY IN HERTZ400.0 NOMINAL
ZRO RESISTANCE IN OHMS1400.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS7300.00 NOMINAL
ZSO RESISTANCE IN OHMS25.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS79.00 NOMINAL
ZRS RESISTANCE IN OHMS1500.00 NOMINAL
PLUS J ZRS REACTANCE IN OHMS410.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS30.00 NOMINAL
STATOR DC RESISTANCE IN OHMS50.00 NOMINAL
TRANSFORMATION RATIO0.087 ROTOR TO STATOR NOMINAL
PHASE SHIFT ANGLE IN DEG6.800 INPUT TO OUTPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT20.00 INPUT
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT10.00
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-7.0 TO 7.0
MAXIMUM LINEAR RANGE IN DEG-30.0 TO 30.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS16.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS4.0 CENTIMETER-GRAMS NOMINAL
TORQUE GRADIENT PER ANGULAR DEG2400.0 MILLIMETER-MILLIGRAMS NOMINAL
BODY STYLESTANDARD ROUND A
PILOT DIAMETER0.5000 INCHES NOMINAL
OVERALL LENGTH1.4600 INCHES MAXIMUM
FLANGE DIAMETER0.7500 INCHES NOMINAL
FLANGE THICKNESS0.0620 INCHES NOMINAL
UNDERCUT DIAMETER0.6910 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL
PILOT LENGTH0.0400 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE1.0700 INCHES MAXIMUM
SHAFT TYPEROUND, SLOTTED BOTH SHAFTS
SHAFT DIAMETER0.0900 INCHES NOMINAL BOTH SHAFTS
SHAFT LENGTH0.3750 INCHES NOMINAL FRONT SHAFT
0.0620 INCHES NOMINAL REAR SHAFT
SHAFT SLOT DEPTH0.0300 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH0.0250 INCHES NOMINAL SINGLE SHAFT
TERMINAL TYPE AND QUANTITY5 WIRE LEAD
TERMINAL LOCATIONSIDE
BODY MATERIALALUMINUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us