| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 10.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 140.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND B |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 15 |
| ZRO RESISTANCE IN OHMS | 880.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 5300.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 7800.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 9512.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1050.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 1300.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 600.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 1050.00 NOMINAL |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 32.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| PILOT DIAMETER | 0.8750 INCHES NOMINAL |
| OVERALL LENGTH | 2.2240 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6400 INCHES NOMINAL |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.1900 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5840 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2920 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| FRAGILITY FACTOR | MODERATELY RUGGED |