| BODY STYLE | STANDARD ROUND A |
| COMPENSATION METHOD | WINDING COMPENSATED |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.7250 INCHES MINIMUM AND 1.7450 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 16.000 INPUT TO OUTPUT MINIMUM AND 20.000 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ROTOR INPUT CURRENT RATING | 45.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 40.0 WATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3480 INCHES MINIMUM AND 0.4720 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0200 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.5 MAXIMUM |
| TRANSFORMATION RATIO | 0.440 ROTOR TO STATOR MINIMUM AND 0.468 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |