| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0985 INCHES MINIMUM AND 1.1015 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.1870 INCHES MAXIMUM |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | A4 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.4810 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 8.00 INPUT |
| MAXIMUM TEMP RISE | 85.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8940 INCHES MINIMUM AND 1.9100 INCHES MAXIMUM |
| PILOT LENGTH | 0.5000 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 215.00 NOMINAL |
| SHAFT DIAMETER | 0.1850 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 155.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 5.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 0.015 WATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 0.5 MINIMUM AND 60.0 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 TAB W/SCREW |
| TRANSFORMATION RATIO | 0.980 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |