| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND A |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 323.00 MINIMUM AND 437.00 MAXIMUM |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.960 ROTOR TO COMPENSATOR MINIMUM AND 1.040 ROTOR TO COMPENSATOR MAXIMUM |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| MATERIAL | ALUMINUM BODY |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.500 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 OUTPUT |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7650 INCHES NOMINAL |
| OVERALL LENGTH | 2.3270 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2300.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 2200.00 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 240.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 293.00 MINIMUM AND 397.00 MAXIMUM |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 0.1248 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 255.00 MINIMUM AND 345.00 MAXIMUM |
| STATOR INPUT CURRENT RATING | 6.6 MILLIAMPERES MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 60.0 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 11 WIRE LEAD |
| TRANSFORMATION RATIO | 0.960 ROTOR TO STATOR MINIMUM AND 1.040 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 1.0000 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 550.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 500.00 NOMINAL |
| ZSS RESISTANCE IN OHMS | 585.00 NOMINAL |