| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 211.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND A |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 8 |
| ZRO RESISTANCE IN OHMS | 470.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1770.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 81.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 330.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 590.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 190.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 365.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 64.00 NOMINAL |
| TRANSFORMATION RATIO | 2.208 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7240 INCHES NOMINAL |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.6100 INCHES MINIMUM AND |
| 0.6630 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND |
| 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.6100 INCHES MINIMUM AND |
| 0.6300 INCHES MAXIMUM |
| PILOT LENGTH | 0.0330 INCHES MINIMUM AND |
| 0.0530 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0880 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4100 INCHES MINIMUM AND |
| 0.4400 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0150 INCHES MINIMUM AND |
| 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0100 INCHES MINIMUM AND |
| 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | ALUMINUM |
| SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| SHAFT END PLAY | 0.0003 INCHES MINIMUM AND |
| 0.0008 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| SPECIAL FEATURES | ROUND,SLOTTED SHAFT IS TAPERED 0.025 INCHES |