| BODY SIZE | 31 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 90.0 MINIMUM AND |
| 115.0 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 440.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 6.6 WATTS NOMINAL |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 28.50 NOMINAL |
| ZSS IMPEDANCE ANGLE IN DEG | 20.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 28.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 117.00 NOMINAL |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 170.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0 TO 36.0 |
| TORQUE GRADIENT PER ANGULAR DEG | 0.400 INCH-OUNCES NOMINAL |
| BODY STYLE | STANDARD ROUND D |
| SHOULDER DIAMETER | 2.7000 INCHES NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| SECOND SHOULDER DIAMETER | 2.7500 INCHES NOMINAL |
| SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| OVERALL LENGTH | 5.1800 INCHES NOMINAL |
| FLANGE DIAMETER | 3.1000 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| BODY DIAMETER | 2.7000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0300 INCHES NOMINAL |
| SHOULDER LENGTH | 0.6950 INCHES NOMINAL |
| AFT OF FIRST FLANGE DIAMETER | 2.7500 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 4.4500 INCHES NOMINAL |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.2405 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.7300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3400 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| SHAFT END PLAY | 0.0010 INCHES MINIMUM AND |
| 0.0050 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| FRAGILITY FACTOR | MODERATELY RUGGED |