6625-01-168-6796 LEAD,TEST Index 4730-01-168-6798 ELBOW,PIPE

National Stock Number:
5990-01-168-6797

Federal Supply Class:
5990

National Item Identification Number:
011686797

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.


Manufacturer Information:
HSC-15-DS-09/F3624H618MOOG INC.
HSC-15-DS-09/F36299932MOOG INC.
SC5990-0006-110112GENERAL DYNAMICS MOTION CONTROL LLC
SC5990-0006-112115DRS ICAS, LLC


Techincal Specification:
FREQUENCY IN HERTZ400.0 NOMINAL
TERMINAL TYPE AND QUANTITY7 WIRE LEAD
BODY STYLESTANDARD ROUND B
BODY SIZE15
ROTOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
ROTOR INPUT CURRENT RATING70.0 MILLIAMPERES MAXIMUM
ROTOR INPUT ELECTRICAL POWER RATING430.0 MILLIWATTS NOMINAL
ZRO RESISTANCE IN OHMS80.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS433.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS54.00 NOMINAL
STATOR DC RESISTANCE IN OHMS9.40 NOMINAL
TRANSFORMATION RATIO0.453 STATOR TO ROTOR NOMINAL
TRANSFORMATION RATIO EQUALITY IN PERCENT3.0 NOMINAL
PHASE SHIFT ANGLE IN DEG7.000 OUTPUT TO INPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT40.00 INPUT
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-12.0 TO 12.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS21.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS7.0 CENTIMETER-GRAMS NOMINAL
SHOULDER DIAMETER1.3120 INCHES NOMINAL
PILOT DIAMETER0.5000 INCHES NOMINAL
OVERALL LENGTH2.1620 INCHES NOMINAL
FLANGE DIAMETER1.4370 INCHES NOMINAL
FLANGE THICKNESS0.0930 INCHES NOMINAL
UNDERCUT WIDTH0.0780 INCHES NOMINAL
PILOT LENGTH0.0400 INCHES NOMINAL
SHOULDER LENGTH0.1320 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE1.6220 INCHES NOMINAL
ALIGNMENT HOLE DEPTH0.0950 INCHES NOMINAL
ALIGNMENT HOLE BOLT CIRCLE DIAMETER0.8750 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY4
SHAFT TYPEROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER0.1200 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH0.5000 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH0.0310 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH0.0310 INCHES NOMINAL SINGLE SHAFT
TERMINAL LOCATIONREAR
SHAFT MAXIMUM RADIAL PLAY0.0010 INCHES
SHAFT END PLAY0.0003 INCHES MINIMUM AND
0.0015 INCHES MAXIMUM
SHAFT END PLAY DETERMINING WEIGHT8.0 OUNCES
SHAFT MAXIMUM RUNOUT0.0010 INCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us