| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 1.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.3 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 2500.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.4510 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 1.100 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.4360 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 1.0000 INCHES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 17.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 12.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 5.8 MILLIAMPERES NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 59.40 NOMINAL |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 128.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 73.35 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 2095.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 69.30 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 481.00 NOMINAL |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TRANSFORMATION RATIO | 0.500 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |