| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 13.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| BODY STYLE | STANDARD ROUND B |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| BODY SIZE | 15 |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 6250.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 76.00 MINIMUM AND |
| 84.00 MAXIMUM |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 1475.00 NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 12.00 MINIMUM AND |
| 20.00 MAXIMUM |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 50.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES NOMINAL |
| SHOULDER DIAMETER | 1.3070 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND |
| 0.8750 INCHES MAXIMUM |
| OVERALL LENGTH | 3.0830 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND |
| 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND |
| 0.0980 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM AND |
| 0.0830 INCHES MAXIMUM |
| PILOT LENGTH | 0.0350 INCHES MINIMUM AND |
| 0.0450 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1070 INCHES MINIMUM AND |
| 0.1270 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5180 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES MINIMUM AND |
| 1.1030 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND |
| 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5450 INCHES MINIMUM AND |
| 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND |
| 0.0015 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |