| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0430 NOMINAL INCHES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6160 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.0880 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT SLOT DEPTH | 0.0150 INCHES MINIMUM SINGLE SHAFT AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| ZRS RESISTANCE IN OHMS | 250.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 94.00 MINIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| TRANSFORMATION RATIO | 1.870 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |