| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AFT OF SECOND FLANGE DIAMETER | 3.3750 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 3.0000 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 5 |
| ALIGNMENT HOLE DEPTH | 0.5000 INCHES NOMINAL |
| BODY DIAMETER | 3.3900 INCHES MAXIMUM |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 37 |
| BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| DISTANCE BETWEEN FLANGES | 1.8120 INCHES NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| FLANGE DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2460 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 50.0 MINIMUM AND 60.0 MAXIMUM |
| LENGTH | 0.7850 INCHES NOMINAL SHOULDER |
| PILOT DIAMETER | 1.6300 INCHES MAXIMUM |
| PILOT LENGTH | 0.0200 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.7680 INCHES NOMINAL |
| OVERALL LENGTH | 6.0500 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 14.60 NOMINAL |
| SECOND SHOULDER DIAMETER | 3.3700 INCHES NOMINAL |
| SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| SHAFT LENGTH | 0.7700 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 48.0 OUNCES |
| SHAFT END PLAY | 0.0010 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 48.0 OUNCES |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3020 INCHES MINIMUM AND 0.3220 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHOULDER DIAMETER | 3.3340 INCHES NOMINAL |
| SPECIAL FEATURES | SHAFT IS ALSO SLOTTED,0.032 IN. WIDE BY 0.047 IN. DEEP;SHAFT RADIAL PLAYTEST POINT JAA0.125 |
| STATOR DC RESISTANCE IN OHMS | 10.50 NOMINAL |
| STATOR INPUT CURRENT RATING | 550.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 4.25 WATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.300 INCH-OUNCES MINIMUM |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |