|
|
|
National Stock Number:
5999-00-248-6847
Federal Supply Class:
5999
National Item Identification Number:
002486847
Description:
DELAY LINE
Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 11813 | 23880 | STANFORD APPLIED ENGINEERING INC | | 16864 | 03550 | VANGUARD ELECTRONICS, LLC | | 712813-001 | 05869 | RAYTHEON COMPANY |
|
Techincal Specification:
| ADJUSTMENT DEVICE DRIVE TYPE | SHAFT | | ADJUSTMENT DEVICE QUANTITY | 1 | | BODY DEPTH | 1.750 INCHES MAXIMUM | | BODY LENGTH | 1.250 INCHES NOMINAL | | BODY STYLE | RECTANGULAR, W/SHAFT | | BODY WIDTH | 1.250 INCHES NOMINAL | | DELAY TIME VARIATION METHOD | VARIABLE | | DISTANCE FROM BOTTOM OF BODY TO CENTER OF SHAFT | 0.625 INCHES NOMINAL | | DISTANCE FROM END OF BODY TO CENTER OF SHAFT | 0.875 INCHES NOMINAL | | INDIVIDUAL SECTION QUANTITY | 1 | | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 0.750 INCHES NOMINAL | | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 0.750 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING FACILITY | THREADED HOLE | | MOUNTING PROVISION ARRANGEMENT STYLE | 2 POSITION DIAGONAL | | OPERATING TEMP RANGE | +0.0 TO 50.0 CELSIUS | | OVERALL DEPTH | 2.750 INCHES MAXIMUM | | PULSE RISE TIME RATING | 0.9 MICROSECONDS | | SECTION DELAY TIME | 2.400 MICROSECONDS MINIMUM SINGLE SECTION AND 2.900 MICROSECONDS MAXIMUM SINGLE SECTION | | SHAFT LENGTH | 1.000 INCHES MAXIMUM | | SHAFT DIAMETER | 0.112 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | SIGNAL DELAY METHOD | LUMPED CONSTANT | | SLOT DEPTH | 0.047 INCHES NOMINAL | | SLOT WIDTH | 0.040 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 WIRE HOOK | | THREAD CLASS | 2B | | THREAD PITCH DIAMETERS | +0.1140 TO 0.1160 INCHES | | THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.138-32 UNC |
|
|