|
|
|
National Stock Number:
5999-00-847-3721
Federal Supply Class:
5999
National Item Identification Number:
008473721
Description:
DELAY LINE
Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 72-30B | 00222 | ESC CONTROL ELECTRONICS LLC DBA CONTROL ELECTRONICS DIVISION OF FIL-COIL | | 9987611 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| SIGNAL DELAY METHOD | ELECTROMECHANICAL | | DELAY TIME VARIATION METHOD | TAPPED | | INDIVIDUAL SECTION QUANTITY | 1 | | SECTION DELAY TIME | 6.000 MICROSECONDS NOMINAL SINGLE SECTION | | SEGMENT QUANTITY PER SECTION | 1 SINGLE SECTION | | SEGMENT DELAY TIME | 300.000 NANOSECONDS NOMINAL SINGLE SECTION 1ST SEGMENT | | INPUT IMPEDANCE RATING | 180.000 OHMS | | OUTPUT IMPEDANCE RATING | 180.000 OHMS | | ATTENUATION IN DECIBELS | 3.000 | | PULSE RISE TIME RATING | 1.2 MICROSECONDS | | ADJUSTMENT DEVICE DRIVE TYPE | SHAFT | | ADJUSTMENT DEVICE QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | SLOT DEPTH | 0.130 INCHES NOMINAL | | SLOT WIDTH | 0.050 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.690 INCHES NOMINAL | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 7.250 INCHES NOMINAL | | BODY WIDTH | 1.630 INCHES NOMINAL | | BODY DEPTH | 1.000 INCHES NOMINAL | | MATERIAL AND LOCATION | STEEL OVERALL | | SURFACE TREATMENT AND LOCATION | ENAMEL BODY | | TERMINAL TYPE AND QUANTITY | 4 WIRE HOOK | | MOUNTING FACILITY | THREADED BUSHING AND | | THREADED STUD | | MOUNTING FACILITY QUANTITY | 1 AND | | 2 | | BUSHING LENGTH | 0.440 INCHES NOMINAL | | STUD LENGTH | 0.470 INCHES NOMINAL | | THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.375-32 UNEF AND | | 0.164-32 UNC | | THREAD CLASS | 2A | | THREAD PITCH DIAMETERS | 0.0312 TO 0.0313 INCHES | | MOUNTING PROVISION ARRANGEMENT STYLE | 2 POSITION IN-LINE | | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 6.500 INCHES NOMINAL | | FSC APPLICATION DATA | RADAR SET,GUIDED MISSILE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 9987611 |
|
|