|
|
|
National Stock Number:
5999-00-960-3262
Federal Supply Class:
5999
National Item Identification Number:
009603262
Description:
CONTACT,ELECTRICAL
Detail:
AN ITEM CONSISTING OF AN ELECTRICALLY CONDUCTIVE MATERIAL DESIGNED TO FURNISH A SURFACE WHICH WILL PHYSICALLY AND ELECTRICALLY MEET ANOTHER CONDUCTING SURFACE FOR THE PURPOSE OF TRANSFERRING ELECTRICAL ENERGY AND/OR OPENING AND CLOSING CIRCUITS. INCLUDES MOVING CONTACTS WHICH MAKE AND/OR SLIDE OVER STATIONARY CONTACTS OR OTHER STATIONARY CONDUCTIVE MATERIAL TO A RESULTING FIXED POSITION. EXCLUDES ITEMS WHICH ARE USED IN CONJUNCTION WITH CONTINUALLY MOVING SURFACES OR WHICH MAKE CONTACT BY GRIPPING ACTION OF THE CONTACT SURFACES. SEE ALSO CLIP, ELECTRICAL; CLAMP, ELECTRICAL; BRUSH, ELECTRICAL CONTACT; PLUG, TIP; AND JACK, TIP.
|
Manufacturer Information:
| 030-9204-001 | 71468 | ITT CANNON LLC | | 73-268570-1620 | 04655 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | S1620PCB06 | 71468 | ITT CANNON LLC |
|
Techincal Specification:
| CABLE ENTRANCE DIAMETER | 0.047 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | OVERALL DIAMETER | 0.128 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | OVERALL LENGTH | 1.194 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-290 FED SPEC SINGLE MATERIAL RESPONSE BODY AND CONTACT | | MATERIAL | COPPER BODY | | MATERIAL | COPPER CONTACT | | MOUNTING METHOD | PIN | | PIN LENGTH | 0.724 INCHES MINIMUM AND 0.756 INCHES MAXIMUM | | PIN DIAMETER | 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM | | PRECIOUS MATERIAL AND LOCATION | BODY AND CONTACT SURFACES GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY | | PRECIOUS MATERIAL | GOLD | | STYLE DESIGNATOR | PIN CONTACT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT | | SURFACE TREATMENT | GOLD AND NICKEL BODY | | SURFACE TREATMENT | GOLD AND NICKEL CONTACT | | TERMINAL TYPE AND QUANTITY | 1 SOLDER WELL AXIALLY AT ONE END | | TEST DATA DOCUMENT | 11293-73-268570-1620 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|