5999-01-227-2107, DELAY LINE

6110-01-227-2108 AMPLIFIER,ELECTRONIC CONTROL

National Stock Number:
5999-01-227-2107

Federal Supply Class:
5999

National Item Identification Number:
012272107

Description:
DELAY LINE

Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.

Manufacturer Information:

M23859/23-150	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-D-23859/23	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

SIGNAL DELAY METHOD	LUMPED CONSTANT
DELAY TIME VARIATION METHOD	TAPPED
INDIVIDUAL SECTION QUANTITY	1
SECTION DELAY TIME	400.000 NANOSECONDS NOMINAL SINGLE SECTION
SEGMENT QUANTITY PER SECTION	8 SINGLE SECTION
SEGMENT DELAY TIME	50.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS
OPERATING TEMP RANGE	-55.0 TO 125.0 DEG CELSIUS
INPUT IMPEDANCE RATING	100.000 OHMS
OUTPUT IMPEDANCE RATING	100.000 OHMS
PULSE RISE TIME RATING	80.0 NANOSECONDS
BODY STYLE	RECTANGULAR
BODY LENGTH	0.740 INCHES MINIMUM AND
	0.780 INCHES MAXIMUM
BODY WIDTH	0.300 INCHES MAXIMUM
BODY DEPTH	0.187 INCHES NOMINAL
MATERIAL AND LOCATION	PLASTIC, EPOXY CASE AND
	NICKEL-COPPER ALLOY, QQ-N-281, CLASS A TERMINAL
SURFACE TREATMENT AND LOCATION	TIN PLATED, MIL-T-10727, TYPE 1 TERMINAL
TERMINAL TYPE AND QUANTITY	14 PIN
MOUNTING FACILITY	PIN
MOUNTING FACILITY QUANTITY	14
MOUNTING PROVISION ARRANGEMENT STYLE	FOUR POSITION RECTANGULAR
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	0.600 INCHES NOMINAL
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS	0.310 INCHES MINIMUM AND
	0.350 INCHES MAXIMUM
TEST DATA DOCUMENT	81349-MIL-D-23859 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
INCLOSURE TYPE	ENCASED
SPEC/STD CONTROLLING DATA
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-D-23859/23
MANUFACTURERS CODE	81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M23859/23-150

Click here to Register for Free 30-day Trial