| APERTURE DIAMETER | 1.312 INCHES MINIMUM AND 1.338 INCHES MAXIMUM |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.130 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.130 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| CROSS-SECTIONAL HEIGHT | 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| CROSS-SECTIONAL SHAPE STYLE | EMI |
| ENVIRONMENTAL PROTECTION MATERIAL LOCATION | THROUGHOUT RF SHIELDING GASKET |
| HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.179 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.179 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| OVERALL LENGTH | 1.508 INCHES MINIMUM AND 1.524 INCHES MAXIMUM |
| OVERALL WIDTH | 1.508 INCHES MINIMUM AND 1.524 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ZZ-R-765, CLASS 3, GRADE 30, IN COMPLIANCE MIL-HDBK-695C FED SPEC SINGLE MATERIAL RESPONSE ENVIRONMENTAL SEAL |
| MATERIAL | RUBBER ENVIRONMENTAL SEAL |
| OUTSIDE CORNER RADIUS | 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-28840/24 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | NON-CIRCULAR |
| SPECIAL FEATURES | RUBBER IMBEDDED WITH MONEL WIRES PER QQ-N-281 |
| TEST DATA DOCUMENT | 81349-MIL-C-28840 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |