|
|
|
National Stock Number:
5999-01-327-6015
Federal Supply Class:
5999
National Item Identification Number:
013276015
Description:
DELAY LINE
Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 0047-0100-M2 | 92912 | BEL FUSE INC | | 10T363 | 20933 | KAPPA TECHNOLOGIES INC. | | 85008 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 1874AS0555 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 4508-08 | 50965 | PRINCETON ADVANCED COMPONENT | | 61Z14A100-05 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 9T100S | 00222 | ESC CONTROL ELECTRONICS LLC DBA CONTROL ELECTRONICS DIVISION OF FIL-COIL | | 85008-08 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 85008-08 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | DSP008-08 | 16714 | RHOMBUS INDUSTRIES INC. | | DDU6-8512-8 | 22519 | DATA DELAY DEVICES | | L-13-911 | 62694 | JBM ELECTRONICS INC |
|
Techincal Specification:
| SIGNAL DELAY METHOD | LUMPED CONSTANT | | DELAY TIME VARIATION METHOD | TAPPED | | INDIVIDUAL SECTION QUANTITY | 1 | | SECTION DELAY TIME | 100.000 NANOSECONDS NOMINAL SINGLE SECTION | | SEGMENT QUANTITY PER SECTION | 5 SINGLE SECTION | | SEGMENT DELAY TIME | 20.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS | | VOLTAGE RATING | 4.500 VOLTS NOMINAL | | PULSE RISE TIME RATING | 4.0 NANOSECONDS | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 0.810 INCHES MAXIMUM | | BODY WIDTH | 0.510 INCHES MAXIMUM | | BODY DEPTH | 0.165 INCHES MAXIMUM | | MATERIAL AND LOCATION | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDG BODY OR | | PLASTIC, EPOXY BODY | | TERMINAL TYPE AND QUANTITY | 8 PIN | | MOUNTING FACILITY | PIN | | MOUNTING FACILITY QUANTITY | 8 | | FRAGILITY FACTOR | MODERATELY DELICATE |
|
|