|
|
|
National Stock Number:
5999-01-351-7240
Federal Supply Class:
5999
National Item Identification Number:
013517240
Description:
DELAY LINE
Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 0047-0075-M2 | 92912 | BEL FUSE INC | | 00T210 | 20933 | KAPPA TECHNOLOGIES INC. | | 85008 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 85008-07 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 4508-07 | 50965 | PRINCETON ADVANCED COMPONENT | | 61Z14A075-03 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 9T75S | 00222 | ESC CONTROL ELECTRONICS LLC DBA CONTROL ELECTRONICS DIVISION OF FIL-COIL | | 85008-07 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | DSP008-07 | 16714 | RHOMBUS INDUSTRIES INC. | | DDU6-8512-7 | 22519 | DATA DELAY DEVICES |
|
Techincal Specification:
| SIGNAL DELAY METHOD | LUMPED CONSTANT | | DELAY TIME VARIATION METHOD | TAPPED | | INDIVIDUAL SECTION QUANTITY | 1 | | SECTION DELAY TIME | 75.000 NANOSECONDS NOMINAL SINGLE SECTION | | SEGMENT QUANTITY PER SECTION | 5 SINGLE SECTION | | SEGMENT DELAY TIME | 15.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS | | OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS | | VOLTAGE RATING | 4.500 VOLTS MINIMUM AND | | 5.500 VOLTS MAXIMUM | | PULSE RISE TIME RATING | 4.0 NANOSECONDS | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 0.810 INCHES MAXIMUM | | BODY WIDTH | 0.510 INCHES MAXIMUM | | BODY DEPTH | 0.165 INCHES MAXIMUM | | MATERIAL AND LOCATION | PLASTIC, MIL-M-14, TYPE SDG-F CASE OR | | PLASTIC, EPOXY CASE | | TERMINAL TYPE AND QUANTITY | 8 PIN | | MOUNTING FACILITY | PIN | | MOUNTING FACILITY QUANTITY | 8 | | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 0.290 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | INCLOSURE TYPE | HERMETICALLY SEALED |
|
|