| APERTURE DIAMETER | 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM |
| CROSS-SECTIONAL HEIGHT | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| CROSS-SECTIONAL SHAPE STYLE | EMI |
| ENVIRONMENTAL PROTECTION MATERIAL LOCATION | THROUGHOUT RF SHIELDING GASKET |
| HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.109 INCHES NOMINAL |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.109 INCHES NOMINAL |
| OVERALL LENGTH | 0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM |
| OVERALL WIDTH | 0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM |
| MATERIAL | ALUMINUM EMI/RFI CONDUCTORSILICONE ENVIRONMENTAL SEAL |
| OUTSIDE CORNER RADIUS | 0.15414 INCHES NOMINAL |
| PRECIOUS MATERIAL AND LOCATION | EMI/RFI CONDUCTIVE PARTICLES SILVER |
| PRECIOUS MATERIAL | SILVER |
| SPECIFICATION/STANDARD DATA | 81349-MIL-G-83528/4 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | NON-CIRCULAR |
| SURFACE TREATMENT | SILVER EMI/RFI CONDUCTOR |
| TEST DATA DOCUMENT | 81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |