| OVERALL LENGTH | 12.875 INCHES |
| OVERALL WIDTH | 6.938 INCHES |
| OVERALL HEIGHT | 8.750 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.625 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SLOT |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| MOUNTING METHOD | ADJUSTABLE BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.3333 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 50.0 OPERATING DEG CELSIUS AND |
| 50.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1725.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.552 INCHES MINIMUM AND |
| 0.553 INCHES MAXIMUM SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | ADAPTER ON TAKE-OFF END DRILLED,8 HOLES EQUALLY SPACED ON A5 IN. BOLT CIRCLE,FOR PUMP MTG |
| TEST DATA DOCUMENT | 81349-MIL-M-1940 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | A CLASS |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILM1940CLASSA |