| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | WATERTIGHT |
| BEARING TYPE | ANNULAR BALL |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 2.500 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| HOLE CENTER TO SHAFT END DISTANCE | 0.1250 INCHES NOMINAL SINGLE END |
| HOLE DEPTH | 0.3750 INCHES NOMINAL SINGLE END |
| HOLE DIAMETER | 0.1250 INCHES NOMINAL SINGLE END |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| KEYWAY DEPTH | 0.0625 INCHES NOMINAL SINGLE END |
| KEYWAY LENGTH | 1.5000 INCHES NOMINAL SINGLE END |
| KEYWAY WIDTH | 0.1250 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 3.562 INCHES SINGLE END |
| OVERALL LENGTH | 12.062 INCHES |
| OVERALL WIDTH | 6.312 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| MOUNTING METHOD | CLAMP RING |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE END |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.1250 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 1800.0 SINGLE NO LOAD AND 1725.0 SINGLE FULL LOAD |
| SHAFT DIAMETER | 0.375 INCHES MINIMUM AND 0.425 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND A9 SECOND STYLE AND A12 THIRD STYLE AND A13 FOURTH STYLE SINGLE END |
| SHAFT END STYLE | STEPPED AND DRILLED HOLE AND EXTERNAL THREADED AND FLAT KEYWAY SINGLE END |
| SPECIFIC USE | FAN MOTOR |
| STEP DIAMETER | 0.4095 INCHES NOMINAL SINGLE END |
| STEP LENGTH | 1.8750 INCHES NOMINAL SINGLE END |
| WINDING TYPE | INDUCTION-SPLIT PHASE |
| TEMP RATING | 50.0 OPERATING CELSIUS AND 40.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| TEST DATA DOCUMENT | 81349-MIL-M-1940 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.5937 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |