| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | SPRAY TIGHT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | FAN COOLED |
| CURRENT RATING METHOD | LOAD AND LOCKED ROTOR |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 1.781 INCHES SINGLE END |
| OVERALL HEIGHT | 6.938 INCHES |
| OVERALL LENGTH | 11.281 INCHES |
| OVERALL WIDTH | 9.500 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| PHASE | THREE INPUT |
| POWER RATING | 1.0000 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 3600.0 SINGLE NO LOAD AND 3450.0 SINGLE FULL LOAD |
| SHAFT DIAMETER | 0.616 INCHES MINIMUM AND 0.617 INCHES MAXIMUM SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.594 INCHES SINGLE END |
| SHAFT END STYLE | SPLINED AND GROOVED SINGLE END |
| SPECIAL FEATURES | NO LUBRICATION REQUIRED |
| SPLINE LENGTH | 1.218 INCHES MINIMUM AND 1.278 INCHES MAXIMUM SINGLE END |
| SPLINE MINOR DIAMETER | 0.520 INCHES MINIMUM AND 0.529 INCHES MAXIMUM SINGLE END |
| SPLINE QUANTITY | 14 SINGLE END |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| TEMP RATING | 50.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 SCREW |
| TORQUE RATING AND TYPE | 1.5 FOOT-POUNDS RUNNING AND 4.8 FOOT-POUNDS STARTING |
| UNDERCUT CENTER TO SHAFT END DISTANCE | 1.237 INCHES MINIMUM AND 1.299 INCHES MAXIMUM SINGLE END |
| UNDERCUT DIAMETER | 0.585 INCHES MINIMUM AND 0.591 INCHES MAXIMUM SINGLE END |
| UNDERCUT LENGTH | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM SINGLE END |