| OVERALL LENGTH | 6.480 INCHES |
| OVERALL WIDTH | 4.000 INCHES |
| OVERALL HEIGHT | 3.500 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.330 INCHES IDENTICAL ENDS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| INCLOSURE FEATURE | GENERAL PURPOSE |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.750 INCHES IDENTICAL ENDS |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.812 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.375 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 0.750 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 130.0 WATTS OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE IDENTICAL ENDS |
| ROTOR SPEED RATING IN RPM | 3150.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE IDENTICAL ENDS |
| SHAFT DIAMETER | 0.128 INCHES NOMINAL IDENTICAL ENDS |
| FLATTED PORTION LENGTH | 1.000 INCHES NOMINAL IDENTICAL ENDS |
| FLAT DEPTH | 0.028 INCHES NOMINAL IDENTICAL ENDS |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DEG WITH SAME DIM. |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 02598 |
| DESIGN CONTROL REFERENCE | 14436 |