| OVERALL LENGTH | 42.375 INCHES |
| OVERALL WIDTH | 25.188 INCHES |
| OVERALL HEIGHT | 24.906 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 4.750 INCHES FIRST END |
| 6.750 INCHES SECOND END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 16.500 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 18.000 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | INTERMITTENT |
| TEMP RATING | 40.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 6 SOLDER LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE FIRST END |
| COUNTERCLOCKWISE SECOND END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 81349-MIL-M-17060 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFIC USE | HANGAR DIVISION DOORS |
| BEARING TYPE | ANNULAR BALL |
| SHAFT END STYLE | FLAT KEYWAY FIRST END |
| FLAT KEYWAY SECOND END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 79500 |
| DESIGN CONTROL REFERENCE | 1JH2967 |