| OVERALL LENGTH | 18.688 INCHES |
| OVERALL WIDTH | 13.000 INCHES |
| OVERALL HEIGHT | 13.750 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 6.938 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| INCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY CIRCLE DIAMETER | 7.250 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| CURRENT RATING IN AMPS | 2.100 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 1.2500 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 50.0 OPERATING DEG CELSIUS AND |
| 40.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 3800.0 SINGLE NO LOAD AND |
| 3510.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A9 SECOND STYLE AND |
| A12 THIRD STYLE SINGLE END |
| THREAD LENGTH | 0.6880 INCHES NOMINAL SINGLE END |
| KEYWAY WIDTH | 0.1250 INCHES NOMINAL SINGLE END |
| KEYWAY DEPTH | 0.0625 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | LEFT HAND THREAD ON SHAFT |
| TEST DATA DOCUMENT | 81349-MIL-M-1940 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SHAFT END STYLE | EXTERNAL THREADED AND |
| STEPPED AND |
| FLAT KEYWAY SINGLE END |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILM1940 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 96169 |
| DESIGN CONTROL REFERENCE | D96-941-27 |