| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.375 INCHES |
| OVERALL HEIGHT | 3.340 INCHES |
| OVERALL WIDTH | 3.340 INCHES |
| ROTOR SPEED RATING IN RPM | 3600.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.680 INCHES IDENTICAL ENDS |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE IDENTICAL ENDS |
| SHAFT DIAMETER | 0.312 INCHES MINIMUM SINGLE END AND 0.313 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE IDENTICAL ENDS |
| SPECIAL FEATURES | SHAFTEND STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DEG,BOTH ENDS |
| WINDING TYPE | SYNCHRONOUS |
| TEMP RATING | -30.0 OPERATING DEG CELSIUS AND 60.0 OPERATING DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| TORQUE RATING AND TYPE | 14.0 INCH-OUNCES STARTING |
| DUTY CYCLE | CONTINUOUS |
| BEARING TYPE | ANNULAR BALL |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FLAT DEPTH | 0.0200 INCHES NOMINAL IDENTICAL ENDS |
| FLATTED PORTION LENGTH | 0.380 INCHES MINIMUM SINGLE END AND 0.500 INCHES MAXIMUM SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| LENGTH OF SHAFT FROM HOUSING | 0.685 INCHES SINGLE END |
| III OVERALL LENGTH | 6.230 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| PHASE | SINGLE INPUT |
| PROPRIETARY CHARACTERISTICS | PACS |