| OVERALL LENGTH | 25.750 INCHES |
| OVERALL WIDTH | 18.438 INCHES |
| OVERALL HEIGHT | 19.375 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 2.625 INCHES FIRST END |
| 1.188 INCHES SECOND END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 7.750 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 13.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 11.000 INCHES |
| CURRENT RATING IN AMPS | 23.500 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 310.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 8.5000 HORSEPOWER OUTPUT |
| WINDING TYPE | SHUNT WOUND W/COMPENSATING WINDINGS |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 1.0 HOURS MAXIMUM ON |
| TEMP RATING | 70.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | FAN COOLED |
| ROTOR SPEED RATING IN RPM | 1500.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A17 SINGLE STYLE FIRST END |
| A3 FIRST STYLE AND |
| A17 SECOND STYLE SECOND END |
| THREAD LENGTH | 0.750 INCHES NOMINAL FIRST END |
| SHAFT DIAMETER | 1.373 INCHES MINIMUM AND |
| 1.374 INCHES MAXIMUM FIRST END |
| 0.748 INCHES MINIMUM AND |
| 0.749 INCHES MAXIMUM SECOND END |
| FULL TOOTH LENGTH | 1.500 INCHES NOMINAL FIRST END |
| 1.062 INCHES NOMINAL SECOND END |
| TEETH QUANTITY | 6 FIRST END |
| 6 SECOND END |
| BEARING TYPE | ANNULAR BALL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 589169PC1 |