| OVERALL LENGTH | 18.937 INCHES |
| OVERALL WIDTH | 12.750 INCHES |
| OVERALL HEIGHT | 9.750 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 6.187 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 5.000 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 6.500 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 8.000 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.7500 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 50.0 OPERATING DEG CELSIUS AND |
| 45.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 3570.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A11 SECOND STYLE AND |
| A12 THIRD STYLE SINGLE END |
| THREAD LENGTH | 0.5000 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.6250 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 81349-MIL-M-1940 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SHAFT END STYLE | WOODRUFF KEYWAY AND |
| STEPPED AND |
| EXTERNAL THREADED SINGLE END |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILM1940SERVICEACLASSAINSULATI0N |