| OVERALL LENGTH | 17.593 INCHES |
| OVERALL WIDTH | 6.656 INCHES |
| OVERALL HEIGHT | 6.500 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 6.093 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.500 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| INCLOSURE FEATURE | SPRAY TIGHT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| CURRENT RATING IN AMPS | 3.500 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.2500 HORSEPOWER OUTPUT |
| WINDING TYPE | COMPOUND WOUND |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 50.0 AMBIENT DEG CELSIUS AND |
| 50.0 OPERATING DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1725.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A9 SECOND STYLE AND |
| A11 THIRD STYLE SINGLE END |
| THREAD LENGTH | 0.5625 INCHES NOMINAL SINGLE END |
| STEP DIAMETER | 0.562 INCHES MINIMUM AND |
| 0.750 INCHES MAXIMUM SINGLE END |
| SHAFT DIAMETER | 0.562 INCHES MINIMUM AND |
| 0.875 INCHES MAXIMUM SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | LH THREAD ON ARMATURE SHAFT |
| TEST DATA DOCUMENT | 81349-MIL-M-17556 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILM17556SERVICEA |