| OVERALL LENGTH | 8.380 INCHES |
| OVERALL WIDTH | 2.760 INCHES |
| OVERALL HEIGHT | 2.760 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.255 INCHES SINGLE END |
| MOUNTING METHOD | PAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.260 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.840 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 25.000 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 28.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 5.8 FOOT-POUNDS RUNNING |
| WINDING TYPE | SERIES WOUND |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 1.0 MINUTES MAXIMUM ON AND |
| 14.0 MINUTES MINIMUM OFF |
| COOLING METHOD | SEPARATELY VENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 20000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 200.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A15 SINGLE STYLE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 05606 |
| MFR SOURCE CONTROLLING REFERENCE | 105D3303 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 95270 |
| DESIGN CONTROL REFERENCE | C091CG867 |