| DUTY CYCLE | CONTINUOUS |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| CURRENT RATING IN AMPS | 1.200 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FLAT DEPTH | 0.138 INCHES NOMINAL SECOND END |
| FLATTED PORTION LENGTH | 0.375 INCHES NOMINAL SECOND END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SECOND END |
| LENGTH OF SHAFT FROM HOUSING | 1.563 INCHES FIRST END |
| III OVERALL LENGTH | 7.313 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | OPEN PROTECTED |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.050 HORSEPOWER OUTPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| NOMINAL THREAD SIZE | 0.190 INCHES FIRST END |
| OVERALL HEIGHT | 3.313 INCHES |
| OVERALL WIDTH | 3.313 INCHES |
| ROTOR SPEED RATING IN RPM | 3600.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.678 INCHES IDENTICAL ENDS |
| SHAFT END STYLE | FLATTED SECOND END |
| SHAFT END STYLE | INTERNAL THREADED FIRST END |
| SHAFT DIAMETER | 0.312 INCHES NOMINAL IDENTICAL ENDS |
| SHAFT ROTATION DIRECTION | CLOCKWISE FIRST END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SECOND END |
| SPECIAL FEATURES | 0.096 IN. DIA HOLE ON SHAFT FIRST END |
| WINDING TYPE | SYNCHRONOUS |
| TEMP RATING | 0.0 OPERATING DEG CELSIUS AND 40.0 OPERATING DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| THREAD LENGTH | 0.375 INCHES MINIMUM FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |