| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| MOUNTING METHOD | PAD |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.750 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.938 INCHES |
| OVERALL HEIGHT | 2.875 INCHES |
| OVERALL WIDTH | 2.375 INCHES |
| ROTOR SPEED RATING IN RPM | 3600.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE IDENTICAL ENDS |
| SHAFT DIAMETER | 0.156 INCHES NOMINAL IDENTICAL ENDS |
| SPECIAL FEATURES | 4 EA MTG HOLES LOCATED AT EA END |
| TEMP RATING | 65.0 AMBIENT DEG CELSIUS AND -55.0 OPERATING DEG CELSIUS AND 55.0 OPERATING DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 SCREW |
| TORQUE RATING AND TYPE | 7.0 INCH-OUNCES STALLED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 480.0 |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 115.0 AC |
| CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.240 |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING METHOD | NO LOAD |
| CURRENT RATING IN AMPS | 0.095 SINGLE INPUT |
| CURRENT TYPE | AC INPUT |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES FIRST END |
| LENGTH OF SHAFT FROM HOUSING | 0.875 INCHES SECOND END |
| III OVERALL LENGTH | 4.375 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| PHASE | TWO INPUT |
| PROPRIETARY CHARACTERISTICS | PACS |