|
|
|
National Stock Number:
6105-00-617-0957
Federal Supply Class:
6105
National Item Identification Number:
006170957
Description:
MOTOR,CONTROL
Detail:
A MOTOR WHICH IS DESIGNED TO BE OPERATED FROM TWO INDEPENDENT VOLTAGE SOURCES, IN SUCH A WAY THAT VARIATIONS IN ONE VOLTAGE SOURCE WILL DETERMINE THE DIRECTION AND SPEED OF THE MOTOR. IN THE ALTERNATING CURRENT TYPE THE VOLTAGES ARE USUALLY APPLIED TO A SPLIT-PHASE STATOR, WHEREAS IN THE DIRECT CURRENT TYPE, ONE VOLTAGE IS APPLIED TO THE STATOR AND THE OTHER TO THE ARMATURE. LOW INERTIA AND RAPID REVERSIBILITY ARE INHERENT CHARACTERISTICS OF THIS TYPE OF MOTOR. SEE ALSO SERVOMOTOR, AUTOMATIC PILOT.
|
Manufacturer Information:
| 57V29 | 30367 | L-TEC WELDING AND CUTTING SYSTEMS | | 57V29 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE | | 6090 | 18797 | DUMORE CORPORATION | | 57V29 | 96073 | ESAB GROUP, INC., THE |
|
Techincal Specification:
| ENCLOSURE FEATURE | TOTALLY ENCLOSED | | CURRENT RATING METHOD | NO LOAD | | CURRENT RATING IN AMPS | 0.083 SINGLE INPUT | | CURRENT TYPE | DC INPUT | | INCLOSURE SPECIFICATION | COMMERCIAL | | LENGTH OF SHAFT FROM HOUSING | 1.922 INCHES SINGLE END | | OVERALL HEIGHT | 4.313 INCHES | | OVERALL LENGTH | 2.235 INCHES | | OVERALL WIDTH | 4.250 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE | | MOUNTING METHOD | FIXED BASE | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.500 INCHES | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.500 INCHES | | ROTOR SPEED RATING IN RPM | 6000.0 SINGLE NO LOAD | | SHAFT DIAMETER | 0.5000 INCHES NOMINAL SINGLE END | | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END | | TEMP RATING | 65.0 AMBIENT CELSIUS AND 50.0 OPERATING CELSIUS |
|
|