| OVERALL LENGTH | 6.270 INCHES |
| OVERALL WIDTH | 3.840 INCHES |
| OVERALL HEIGHT | 3.840 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.410 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | OPEN |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.250 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.406 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.125 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.015 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-PERMANENT SPLIT CAPACITOR SPLIT PHASE |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 15.0 MINUTES MAXIMUM ON AND |
| 15.0 MINUTES MINIMUM OFF |
| TEMP RATING | 0.0 OPERATING DEG CELSIUS AND |
| 50.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1500.0 SINGLE FULL LOAD |
| SHAFT DIAMETER | 0.375 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.047 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SHAFT END STYLE | FLATTED SINGLE END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 59436 |
| DESIGN CONTROL REFERENCE | 5KCP13DG7A |