| INCLOSURE FEATURE | DRIPPROOF-15 DEG |
| THREAD LENGTH | 0.7500 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 10.000 INCHES SINGLE END |
| TAPER LENGTH | 4.2500 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| PHASE | THREE INPUT |
| DUTY CYCLE | CONTINUOUS |
| KEYWAY DEPTH | 0.2500 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 2.1250 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 4.875 INCHES SINGLE END |
| BEARING TYPE | ANNULAR BALL |
| CURRENT RATING IN AMPS | 103.000 SINGLE INPUT |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 16.000 INCHES |
| KEYWAY WIDTH | 0.5000 INCHES NOMINAL SINGLE END |
| CURRENT RATING METHOD | LOAD |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END |
| TAPER | 0.750 PER FOOT IN INCHES SINGLE END |
| TEMP RATING | 50.0 OPERATING DEG CELSIUS |
| OVERALL LENGTH | 31.250 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| OVERALL WIDTH | 23.750 INCHES |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| MOUNTING METHOD | FIXED BASE |
| POWER RATING | 75.0000 HORSEPOWER OUTPUT |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 13.750 INCHES |
| TEST DATA DOCUMENT | 81349-MIL-M-17060A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| ROTOR SPEED RATING IN RPM | 1800.0 SINGLE NO LOAD AND 1760.0 SINGLE FULL LOAD |
| SHAFT END STYLE | INTERNAL THREADED AND TAPERED AND KEYED SINGLE END |
| OVERALL HEIGHT | 22.500 INCHES |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |