| OVERALL LENGTH | 52.875 INCHES |
| OVERALL WIDTH | 32.374 INCHES |
| OVERALL HEIGHT | 25.250 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 6.250 INCHES FIRST END |
| 6.375 INCHES SECOND END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 12.625 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 26.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 22.250 INCHES |
| INCLOSURE FEATURE | WATERTIGHT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| CURRENT RATING IN AMPS | 370.000 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 50.0000 HORSEPOWER OUTPUT |
| WINDING TYPE | SHUNT WOUND |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 30.0 MINUTES MAXIMUM ON |
| TEMP RATING | 55.0 AMBIENT DEG CELSIUS AND |
| 40.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE IDENTICAL ENDS |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A29 SECOND STYLE IDENTICAL ENDS |
| THREAD LENGTH | 2.1250 INCHES NOMINAL IDENTICAL ENDS |
| TAPER LENGTH | 3.2500 INCHES NOMINAL IDENTICAL ENDS |
| KEYWAY WIDTH | 0.7500 INCHES NOMINAL IDENTICAL ENDS |
| KEYWAY DEPTH | 0.3750 INCHES NOMINAL IDENTICAL ENDS |
| SHAFT DIAMETER | 3.0000 INCHES NOMINAL IDENTICAL ENDS |
| KEYWAY LENGTH | 3.2500 INCHES NOMINAL IDENTICAL ENDS |
| TAPER | 1.300 PER FOOT IN INCHES IDENTICAL ENDS |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 81349-MIL-M-2511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFIC USE | MOTOR FOR DRIVING TOWING MACHINE |
| BEARING TYPE | ROLLER |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-M-17413 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 50380 |
| DESIGN CONTROL REFERENCE | 8921 |