| OVERALL LENGTH | 22.125 INCHES |
| OVERALL WIDTH | 17.813 INCHES |
| OVERALL HEIGHT | 14.938 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 3.188 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| INCLOSURE FEATURE | SPRAY TIGHT |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 6.250 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 8.938 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 11.125 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| CURRENT RATING IN AMPS | 13.300 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 10.0000 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | INTERMITTENT |
| TEMP RATING | 40.0 OPERATING DEG CELSIUS AND |
| 75.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | FAN COOLED |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1650.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A3 FIRST STYLE AND |
| A14 SECOND STYLE SINGLE END |
| THREAD LENGTH | 0.6250 INCHES NOMINAL SINGLE END |
| SPLINE MINOR DIAMETER | 1.1085 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 1.241 INCHES MINIMUM AND |
| 1.500 INCHES MAXIMUM SINGLE END |
| SPLINE LENGTH | 1.5000 INCHES NOMINAL SINGLE END |
| SPLINE QUANTITY | 19 SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | 4 ADDITIONAL THREADED MTG HOLES IN MTG FEET LOCATED ON 6.313IN. BY 8.625 IN. CENTERS WITH THE 8.625 IN. CENTERS PARALLEL TOSHAFT AXIS |
| TEST DATA DOCUMENT | 10001-2120870 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |