| OVERALL LENGTH | 4.391 INCHES |
| OVERALL WIDTH | 3.351 INCHES |
| OVERALL HEIGHT | 3.351 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.626 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.750 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE AND |
| FACE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.812 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.375 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 2.937 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 0.400 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 50.0 OR |
| 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0666 HORSEPOWER OUTPUT |
| TORQUE RATING AND TYPE | 6.0 INCH-OUNCES STARTING |
| WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 3350.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.312 INCHES MINIMUM AND |
| 0.313 INCHES MAXIMUM SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 02598 |
| DESIGN CONTROL REFERENCE | NBC-L18-6 |