| OVERALL LENGTH | 3.625 INCHES |
| OVERALL WIDTH | 3.500 INCHES |
| OVERALL HEIGHT | 3.844 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.000 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE AND |
| FACE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.125 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 2.813 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 0.600 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 6.0000 WATTS OUTPUT |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -40.0 OPERATING DEG FAHRENHEIT AND |
| 120.0 OPERATING DEG FAHRENHEIT |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 SOLDERLESS LUG |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1050.0 SINGLE FULL LOAD |
| THREAD LENGTH | 0.5000 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | FOUR ADDITIONAL MOUNTING HOLES ON TOP,SAME DIM. |
| SHAFT END STYLE | EXTERNAL THREADED SINGLE END |