| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 KONICA, QH FOUR-SPLINE INPUT |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 216.0 |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 18.0 AC AND 36.0 AC |
| CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED OR TWO WINDINGS, PARALLEL CONNECTED |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.768 AND 0.384 |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING METHOD | LOAD |
| CURRENT RATING IN AMPS | 0.120 SINGLE INPUT |
| CURRENT TYPE | AC INPUT |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| LENGTH OF SHAFT FROM HOUSING | 0.437 INCHES SINGLE END |
| III OVERALL LENGTH | 2.093 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| PHASE | SINGLE INPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.100 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FACE |
| OVERALL HEIGHT | 1.437 INCHES |
| OVERALL WIDTH | 1.437 INCHES |
| ROTOR SPEED RATING IN RPM | 5000.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1770 INCHES NOMINAL SINGLE END |
| SPLINE LENGTH | 0.4380 INCHES NOMINAL SINGLE END |
| SPLINE MINOR DIAMETER | 0.1560 INCHES NOMINAL SINGLE END |
| SPLINE QUANTITY | 15 SINGLE END |
| TEMP RATING | 65.0 AMBIENT DEG CELSIUS AND -55.0 OPERATING DEG CELSIUS AND 125.0 OPERATING DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 6 SOLDER LUG |
| TEST DATA DOCUMENT | 03956-1801303 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TORQUE RATING AND TYPE | 1.3 INCH-OUNCES STALLED |