| OVERALL LENGTH | 23.625 INCHES |
| OVERALL WIDTH | 18.062 INCHES |
| OVERALL HEIGHT | 16.500 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 4.687 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | WATERTIGHT |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 6.984 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 9.500 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 11.000 INCHES |
| INCLOSURE SPECIFICATION | NEMA |
| FRAME SIZE DESIGNATION | 284UNDZ |
| CURRENT RATING IN AMPS | 25.400 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 20.000 HORSEPOWER OUTPUT |
| TORQUE RATING AND TYPE | 221.5 FOOT-POUNDS STALLED |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | INTERMITTENT |
| TEMP RATING | 40.0 OPERATING DEG CELSIUS |
| COOLING METHOD | SELF-VENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1800.0 SINGLE NO LOAD AND |
| 1645.0 SINGLE FULL LOAD |
| THREAD LENGTH | 0.750 INCHES NOMINAL SINGLE END |
| TAPER LENGTH | 2.250 INCHES NOMINAL SINGLE END |
| KEYWAY WIDTH | 0.374 INCHES NOMINAL SINGLE END |
| KEYWAY DEPTH | 0.188 INCHES MINIMUM AND |
| 0.204 INCHES MAXIMUM SINGLE END |
| SHAFT DIAMETER | 0.750 INCHES NOMINAL SINGLE END |
| KEYWAY LENGTH | 2.250 INCHES NOMINAL SINGLE END |
| TAPER | 1.200 PER FOOT IN INCHES SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |
| NOMINAL THREAD SIZE | 0.750 INCHES SINGLE END |
| THREAD DIRECTION | RIGHT-HAND SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | SHAFT END SECOND STYLE 1.624 IN. MIN,1.625 IN. MAX DIA |
| SHAFT END STYLE | EXTERNAL THREADED AND |
| TAPERED AND KEYED SINGLE END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 71956 |
| DESIGN CONTROL REFERENCE | 87218 |