| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 230.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.359 INCHES SINGLE END |
| OVERALL HEIGHT | 3.844 INCHES |
| OVERALL LENGTH | 3.859 INCHES |
| OVERALL WIDTH | 3.500 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.125 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE END |
| PHASE | SINGLE INPUT |
| POWER RATING | 9.0000 WATTS OUTPUT |
| ROTOR SPEED RATING IN RPM | 1450.0 LOW FULL LOAD AND 1550.0 HIGH FULL LOAD |
| SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.922 INCHES SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| SHAFT END STYLE | EXTERNAL THREADED SINGLE END |
| SPECIAL FEATURES | FOUR MOUNTING HOLES ON OPPOSITE SIDE,SAME DIM. |
| WINDING TYPE | INDUCTION-SHADED POLE |
| TEMP RATING | -40.0 OPERATING FAHRENHEIT AND 120.0 OPERATING FAHRENHEIT |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| THREAD LENGTH | 0.3590 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |