| DUTY CYCLE | CONTINUOUS |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 220.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| FREQUENCY IN HERTZ | 50.0 INPUT OR 60.0 INPUT |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES SINGLE END |
| III OVERALL LENGTH | 3.050 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | GENERAL PURPOSE |
| PHASE | SINGLE INPUT |
| POWER RATING | 5.0000 WATTS OUTPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.125 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE END |
| OVERALL HEIGHT | 3.410 INCHES |
| OVERALL WIDTH | 3.840 INCHES |
| ROTOR SPEED RATING IN RPM | 1550.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.920 INCHES SINGLE END |
| SHAFT END CHARACTERISTIC | A2 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| WINDING TYPE | INDUCTION-SHADED POLE |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| THREAD CLASS | 2A SINGLE END |
| THREAD DIRECTION | RIGHT-HAND SINGLE END |
| THREAD LENGTH | 0.335 INCHES MINIMUM SINGLE END AND 0.345 INCHES MAXIMUM SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |