| OVERALL LENGTH | 2.687 INCHES |
| OVERALL WIDTH | 2.750 INCHES |
| OVERALL HEIGHT | 2.656 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.750 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| INCLOSURE FEATURE | OPEN |
| MOUNTING METHOD | END BELL |
| MOUNTING FACILITY CIRCLE DIAMETER | 2.031 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 0.280 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.001 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 2 SOLDERLESS LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 3500.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.157 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | INSULATION ON WINDING MUST STAND 155 DEG C;HIGH TEMP LUBRICATION;ROTOR CORROSION AND FUNGUS TREATED;ROTOR SHALL BE ZINC PLATED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 06442 |
| DESIGN CONTROL REFERENCE | 30189 |