| OVERALL LENGTH | 13.500 INCHES |
| OVERALL WIDTH | 8.188 INCHES |
| OVERALL HEIGHT | 6.750 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 2.000 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | FUNGUS PROOF AND |
| WATERPROOF |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.500 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE AND |
| FACE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| DUTY CYCLE | CONTINUOUS |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD AND |
| 5 SOLDERLESS LUG |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| KEYWAY WIDTH | 0.188 INCHES MINIMUM AND |
| 0.190 INCHES MAXIMUM SINGLE END |
| KEYWAY DEPTH | 0.092 INCHES MINIMUM AND |
| 0.094 INCHES MAXIMUM SINGLE END |
| SHAFT DIAMETER | 0.625 INCHES NOMINAL SINGLE END |
| KEYWAY LENGTH | 1.440 INCHES NOMINAL SINGLE END |
| SPECIAL FEATURES | THE MOTORS SHALL BE DESIGNED AND TESTED IAW: NATIONAL ELECTRIC MANUFACTURERS ASSOCIATION(NEMA) PUBLICATION NO. MG1 AND OTHER REQUIREMENTS AS SPECIFIED ON THIS DRAWING // THE MOTOR SHALL HAVE 3 WIRES, PHASE A, B & C, 84"+-1, 12 AWG, WITH TERMINAL LUGS, MS25036-156 AND 2 WIRES, P1 & P2, 72"+-1, 18 AWG, WITH TERMINAL LUGS, MS25036-101 // SPECIFICATIONS: A. VOLTAGE(208/230 VOLT +10% -5%) X B. FREQUENCY(50/60 HZ +-5%) X C. PHASE(3) X D. WEIGHT(40 LBS MAX) X E. HORSEPOWER & SPEED(2 BRAKE HORSEPOWER AT 1725 RPM MIN., CONTINUOUS RATING) X F. EFFICIENCY(75% MIN) |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ITEM NAME: MOTOR,EVAPORATOR |
| SHAFT END STYLE | FLAT KEYWAY SINGLE END |