| OVERALL LENGTH | 15.230 INCHES |
| OVERALL WIDTH | 7.360 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.520 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 5.000 INCHES |
| INCLOSURE FEATURE | OPEN PROTECTED |
| FREQUENCY IN HERTZ | 380.0 OR |
| 420.0 OUTPUT |
| PHASE | THREE OUTPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 110.0 LINE TO LINE LOW OUTPUT |
| POWER RATING | 30.0 KILOVOLT-AMPERE OUTPUT |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -40.0 OPERATING DEG CELSIUS AND |
| 71.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED AND |
| SEPARATELY VENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 15000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 4 THREADED STUD |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 11100.0 LOW FULL LOAD AND |
| 12600.0 HIGH FULL LOAD OR |
| 15200.0 HIGH NO LOAD |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| SPLINE MINOR DIAMETER | 0.470 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.598 INCHES MINIMUM AND |
| 0.600 INCHES MAXIMUM SINGLE END |
| SPLINE QUANTITY | 6 SINGLE END |
| SPECIAL FEATURES | ASSEMBLY INCLUDES P/N K884087-403 (GENERATOR), P/N K884087-305 (SPLINED COUPLING SHAFT), P/N K884087-007 (SPLINE ADAPTER), P/N M83248/1-110 (O-RING), MIL-G-21164D (MOLYBDENDUM DISULFIDE GREASE), AND P/N P17734 (BACK-UP RING); ADDING SPLINE ADAPTER INCREASES OVERALL LENGTH TO 16.230 INCHES NOMINAL, CHANGES COUPLING SHAFT END FROM 6 TO 16 SPLINE, WITH A ROOT DIAMETER OF 0.725 TO 0.733 INCH, AND SHAFT (MAJOR) DIAMETER OF 0.812 TO 0.817 INCH |